Depending on where you live, you may not need a front license plate. Many provinces & states only require a rear license plate. Check with your Registry of Motor Vehicles (or equivalent). (In THE US) If your state requires front license plates, you need to contact a parts dealer for your vehicle make to find out what they have to offer.

All car makes offer a front license plate bracket. It will be worth it to purchase and install the plate bracket. This will be less expensive than paying one or two or more violation citations, not to mention the effect on your drivers' license and possibly your auto insurance. Additional: If you purchased the vehicle in a state that requires two license plates and the dealer did not supply you with a front plate bracket HE OWES YOU ONE FREE OF CHARGE or he is not complying with the law by selling you a vehicle that doesn't meet the state's motor vehicle requirements.   If the 2002 is like the 2004, I just changed mine.

First, you need to pry off the cover for each light. The best way is to find the side of the cover that has the arrow etched into it. It has a longer lip, and is easier to pry with a screwdriver. Once off, turn the light housing counterclockwise to get it out of the light cover.

Find great deals on eBay for front license plate ford escape and 2013 ford escape front license plate ford escape. Shop with confidence. At JC Whitney, we offer the best selection of Ford Escape License Plate Fasteners parts and accessories. Narrow your selection below by providing the year of your vehicle for a custom list of Ford Escape License Plate Fasteners products. REPLACEMENT OE STYLE LICENSE PLATE BRACKET. Order fresh Ford Escape License Plate Bracket from us today! Our fast and hassle-free shipping methods allow you to work on your ride in no time.

Then pull out the bulb (for one, I had to use a rubber gripper, the other one came out very easy). Magic M4a To Mp3 Converter 3.72 Serial Key. Replace the bulb and then twist the bulb housing clockwise to get in. When putting the light cover back in, the small fixed plastic notch on the light cover goes on the side of the opening without the notch. The longer, flexible notch (like on a remote control) goes on the other side and snaps right in. Took me about 5-7 minutes on the first one. Less than a minute with the second one once I knew what I was doing.     You need the replacement bulbs, flat head screwdriver and socket set.

Contoh Sasaran Mutu Iso 9000.   (don't remember the size.3/8 to 1/2 socket)?     Open the lift gate to the p oint where you see the socket holders (lens).     Noting the direction of the arrow on the lens (should be pointing to the right). Using your fingers and screwdriver push and hold the lens as far as it will go (to the right) then lift and unsnap the holder from the body panel.

    While looking at the back of the lens, twist and remove the bulb socket from the lens holder. Be sure to hold onto bulb socket so that the connecting wires do not pull the socket into the panel cavity. Put the lens holder aside.     Using your fingers pull the bulb from the socket and replace with the new bulb.

    Return the bulb socket to the lens holder by aligning the clips on the socket to the notched holes on the holder and and turn and lock the socket into the holder.     Align and insert the spring clip (the one that you can squeeze) on the holder, with the notched portion of the hole on the liftgate panel. Push to the right until the holder snaps back into the liftgate panel.     Repeat the procedure for the left lens.   It was necessary to loosen the screw (immediately to the right of the lens holder) on the leftgate handle because it prevented the lens holder from being pushed to the right.this was only for the left lens.use the socket wrench.

2001-2003 Ford Escape Front License Plate Bracket Genuine New Includes bracket And pop rivets (Rivet gun required for proper install). If you do not have a rivet gun, you can use self tapping screws and drill directly into the bumper. Our customers are reporting in average install time of about 10 minutes. Although most brackets can be installed by just about anyone, we recommend that if it appears to be too difficult that you have the bracket installed by a professional. Instructions are not included This bracket is made specifically for this vehicle and is made with the correct curvature of the bumper to be a perfect match and fit.

The bracket is made by the same company who built your car. Related Items. Download Mp3 Lagu Islami Terbaru 2011.