How to assign an IP Address to APC AP9630 NMC2 card with a Serial Cable. Attach it to your serial port. To assign an IP Address to APC AP9630 NMC2. UPS Network Management Card 2 User’s Guide 5 Front Panel (AP9630) Front Panel (AP9631) Item Description Serial configuration port Connects the NMC to a local.

• 9600 bps, 8 data bits, no parity, 1 stop bit, and no flow control. Apply the port settings to establish the connection. Press 3-5 times to display the username prompt.* Use the default username and password of 'apc' • Communicate via serial connection. My serial ports check out fine using a loopback connector and other serial. APC by Schneider Electric shall have. • This website may contain content submitted by users and is for informational purposes only. APC by Schneider Electric shall have no responsibility for the accuracy.

• First of all you need the correct Serial Cable to connect to the UPS. They are usually black serial RS-232 cables with the Part Number 940-0024C. • Are there any serial port configuration screens other than the Device Manager >Ports >Serial Ports >Com1 for the Dell Dimension 8100 running Windows 2000 Service.

• Sep 2, 2008. Now connect the other end of the serial cable to the serial port on your server. Attaching the serial cable to the server.

For a usb connection. • How To Use This Manual. Astral Projection Torrent Download on this page. This is the manual for apcupsd, a daemon for communicating with UPSes (Uninterruptible Power Supplies) made by American Power Conversion. • I have attempted to connect via serial cable (the APC serial cable. The 'Network Management Device IP Configuration Wizard' to configure it? Today I’m gonna show you how to configure an APC AP9630 Network Management Card 2. This card allows you to manage your UPS remotely.