Credit where credit is due: OLLis8h aka N73User who have made these instructions and created the necessary archives. I supply here a rewritten and English version of these instructions which were in German, and can be read in their original state at this link: Those who have the fat PS2 may also use the PS1 Exploit by pepsi_max2k, found at: This guide is intended for those who have wound up with a Action Replay Max Evo disc with no media player. If you have a disc with Max Media Player, you’ll be better off following this guide by JNABK: For this guide one needs the following materials: -Action Replay Max Evo without media player -USB-drive, formatted in FAT32 -OLLi_s8h – FMCB v1.8 _ ARMax _ USB-Pack.rar () -PS2 Memory card (I used the official 8Mb card) This guide will assist in the installation of Free McBoot v1.8. If another version is desired one should just swap the one in the archive with the other one (this is more precisely covered in the appropriate part of the guide).

It goes without saying that you are 100% responsible for any damage you do to your equipment while following unofficial tutorials on the Internet. Although damaging anything when following this tutorial seems extremely unlikely. You probably want to get your hands dirty by now, so here are the instructions step-by-step: 1.

Ways To Install Freemcboot On Your PS2 To Play Games Via USB CODEBREAKER METHOD Requirements:: (1)flash drive or ps2 memory card adapter with sd card (2)freemcboot noobie package rar file (3)prince of persia collection with codebreaker inside (4)codebreaker file (5)pc (6)openps2loader. Install Fmcb From Usb. Install Free. Boot onto the internal hard drive of a PS2 Fat, but even this can be undone by removing or reformatting the hard drive. A hardmodded PS2 console (had a chip installed to give it modded abilities). An original (Fat) PS2 with FreeHDBoot softmod installed on it. An already existing, working FreeMCBoot Memory Card. You also need: A computer (operating system does not matter). A USB removable storage drive (512MB.

Extract the contents of OLLi_s8h – FMCB v1.8 _ ARMax _ USB Pack.rar into the root folder of the USB drive. If you don’t already have a file archiver, I suggest 7-Zip (). The root of the USB-drive should contain: • INSTALL • MaxSettings • 00000_180_ActionRepl.max • codelist.bin • FREE_MCBOOT.ELF Optional step: Replace INSTALL and FREE_MCBOOT.ELF with a different version. Boot up the Action Replay Max Evo disc in the PS2, without the USB-drive.

If prompted with «Internet Connection Detected. Do you wish to check online for updates? Psp Cricket Games. », press no. Open Settings (Lower right corner), allow the codelist to load. Turn off «Automatic Update Prompt» then «Save and Exit». Now turn off the PS2 and connect your prepared USB-drive. Boot up the Action Replay Max Evo disc again, this time while the USB-drive is connected to USB-port 1.

Open Max Memory. Select My devices, then choose the USB-drive as the primary device. Select «AR MAX Codelist ver. -804409333» and copy to MC1.

Press triangle to return to the primary device selection screen. Choose the memory card.

You should have two entries called «ActionReplayMAX Settings», delete the one which is 66Kb in size (Size of selected files is shown right above the file list). Press triangle to return to the primary device selection screen.