QLogic SANbox 5600/5602 Stackable FC Switch Hardware Release Notes 819-6114-12 QLogic SANbox 5600/5602 Stackable FC Switch Hardware Release Notes This document contains important information about the QLogic SANbox 5600 and SANbox 5602 Stackable Fibre Channel (FC) switch hardware installed in Sun storage area networks (SANs). Note - The only difference between the QLogic SANbox 5602 and 5600 switches is that the 5602 has two hot-swappable power supplies, while the 5600 has one fixed power supply. Read this document so that you are aware of issues or requirements that can impact the installation and operation of the QLogic SANbox 5600 and 5602 FC switch in a Sun SAN.

Introduction To Protein Science Lesk Pdf To Word more. Note - Sun is not responsible for the availability of third-party web sites mentioned in this document. Sun does not endorse and is not responsible or liable for any content, advertising, products, or other materials that are available on or through such sites or resources. Sun will not be responsible or liable for any actual or alleged damage or loss caused by or in connection with the use of or reliance on any such content, goods, or services that are available on or through such sites or resources.

Switch Management User's Guide -4.2, 4.2, This manual describes the switch management tools which include the SANsurfer Switch Management application and the Command Line Interface (CLI). These switch management tools support SANbox 5200 switches. This manual is to be used with Firmware version 4.2.0.18. Free download SANsurfer Router Manager forMacOSX. SANsurfer Router Manager is a GUI tool used for managing the iSR6000 Series of QLogic intelligent Storage Routers. This document contains important information about the QLogic SANbox 5600 and SANbox 5602 Stackable Fibre Channel (FC) switch hardware installed in Sun storage. See the section Downloading and Installing Patches for further information regarding the installation of this patch. SANSurfer Switch Manager 5.00.05. Don’t know what is SANsurfer_Switch_Manager and how to remove it from your PC? Here is the tutorial for your reference.

This document contains the following sections: • • • • •. Product Features The QLogic SANbox 5600 and 5602 FC switches are 4-Gbit Fibre Channel switches that offer low price per port connectivity. The base QLogic SANbox 5600 and 5602 FC switch has the following ports: • Eight 4-Gbit ports enabled initially • Capability to add ports in 4-port increments up to a maximum of 20 ports • Four 10-Gbit ISL ports • Capability to move a currently licensed port to another port. This allows the activation of up to all four 10-Gbit ISL ports with only an eight port license.

Note - The capability to move a licensed port to another port requires firmware version 6.7.0.07 (minimum) and Enterprise Fabric Suite (EFS) version 6.07.05 (minimum). Autocad Lt 2009 Download Deutsche on this page. Additional QLogic 560x FC switches can be stacked together by using the QLogic SANbox 5600 and 5602 FC switch 10-Gbit ISL ports. QLogic 5200 FC switches can also be included in the stack. Thus, a total of six QLogic 5200 and 560x FC switches can be stacked together to create a maximum of 96 2-Gbit or 4-Gbit ports.

(For switch stacking details, refer to the QLogic documentation listed in.). Switch Requirements This section describes some special requirements for the QLogic SANbox 5600 and 5602 FC switches. The following topics are discussed: • • • • • Shipping or Moving a Rackmounted QLogic 5600 FC Switch When mounting the QLogic SANbox 5600 FC switch in the equipment rack, you must use the accessory mounting L-brackets supplied with the switch. Caution - The supplied mounting L-brackets are not approved for moving or shipping a QLogic SANbox 5600 FC switch installed in an equipment rack. The brackets cannot sustain impacts and vibration associated with equipment relocation. To move or ship a rack with a QLogic SANbox 5600 FC switch mounted in the rack you must do one of the following: • Remove the switch from the rack • Use rack mounting kit SG-XSWQLG5200-RK-Z, which is designed for shipping the rack with the switch installed. Shipping or Moving a Rackmounted QLogic 5602 FC Switch To move or ship a rack with a QLogic SANbox 5602 FC switch mounted in the rack, you must do one of the following: • Remove the switch from the rack • Use rack mounting kit SG-XSWQLG5200-RK-Z, which is designed for shipping the rack with the switch installed.

Firmware Requirements For complete feature functionality, upgrade the SANbox 5600 or 5602 FC switch to the minimum required firmware version 6.7.0.07. Features of this version include: • Support for EFS • Support for stacking of six switches • Ability to move port licenses The latest firmware patch ID for this version is 128175-01. See the section for further information regarding the installation of this patch. Installing the Switch Into an Existing Fabric If you are installing a QLogic SANbox 5600 and 5602 FC switch into an existing fabric that has a QLogic switch or a Sun StorEdge Network FC switch, you must do the following: 1.Remove all 1-Gbit QLogic and Sun StorEdge Network 1-Gbit FC switches from the fabric. Upgrade any QLogic or Sun StorEdge Network 2-Gbit FC switches to the minimum firmware version 5.0.1.10.